ECX 1028 Servo Saver Set 2wd All

ECX 1028 Servo Saver Set 2wd All This is a factory replacement Servo Saver Set from ECX intended for the Amp, Boost, Circuit, Ruckus, and Torment 2WD models. Features:Factory Replacement Servo Saver Set Includes:(1) Servo Saver Set Optional...

Traxxas Steering Linkage Revo 3.3

Traxxas 5341 Steering Linkage Revo 3.3 This is a replacement steering linkage set for the Traxxas Revo monster truck. This linkage set contains all of the necessary turnbuckles, rod ends, and hollow balls to install into your Revo. Traxxas E-Revo...

Traxxas 2754 Stub Axle Pins (4)

Traxxas 2754 Stub Axle Pins (4) This is a set of four replacement rear axle stub pins from Traxxas. These axle stub pins go through the axle stub, and lock into the wheel hubs. Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas...

Axial 80078 Transmission Spur Gear Cover (SCX10, AX10)

Axial 80078 Transmission Spur Gear Cover (SCX10, AX10) This is an optional Axial Transmission Spur Gear Cover, and is intended for use with the Axial SCX10 and AX10 Scorpion vehicles. Features: Fits all Axial SCX10 and AX10 transmissions Helps Keep...

Axial 30435 Steel Outdrive Shaft Set (Wraith) (2)

Axial 30435 Steel Outdrive Shaft Set (Wraith) (2) This is a replacement Axial Steel Outdrive Shaft Set, and is intended for use with the Axial Wraith. Features: Factory Replacement Shaft Set Steel Construction for Durability Black oxide coating to...

Axial 30190 Shaft 5x18mm (2)

Axial 30190 Shaft 5x18mm (2) This is a pack of two replacement 5x18mm shafts from Axial. This shaft is used as an idler shaft in the transmission. Features:Factory Replacement Part Includes:(2) 5x18mm Shafts Axial AX10 Axial SCX10 Axial...

Axial 089 M3x25mm Cap Head Screws (10)

Axial 089 M3x25mm Cap Head Screws (10) This is a pack of ten 3x25mm cap screws from Axial. Features:Factory Replacement Part Includes:(10) 3x25mm Cap Head Screws Axial AX10 Axial SCX10 Axial SMT10 Axial Wraith Rock Racer Axial Yeti Rock...

Team Associated 0.030 Nylon Washer

Team Associated 4187 Nylon Axle/Shock/Hub Carrier Spacer   This is a pack of nylon front axles spacers for Team Associated trucks and buggies. You can also use these to adjust the camber link locations under the ball studs.   Team...

Team Associated 5mm Long Ball Stud (10)

Team Associated 31283 5mm Long Ball Stud (10) This is a pack of ten replacement Team Associated 5mm Long Ball Studs. Team Associated RC10 B6 Team Associated RC10 B6D Team Associated RC10 R5 Team Associated RC12 R5 Team Associated RC12 R6 Team...

Team Losi Racing Body Mount Set 22 SCT 2.0/3.0

Team Losi Racing 231030 Body Mount Set 22 SCT 2.0/3.0 This is a replacement Team Losi Racing Body Mount Set.  Features:Plastic construction Includes:Body Mount Set Team Losi Racing 22SCT 2.0 Team Losi Racing 22SCT 3.0  

Traxxas Aluminum Motor Plate (Blue)

Traxxas 6890X Aluminum Motor Plate (Blue) The machined Aluminum Motor Plate offers rock-solid mounting security for major horsepower in all Slash 4X4 and 1/10 Rally models. Brilliant anodizing with bright aluminum highlights show off the artfully...

Traxxas Motor Plate Slash 4x4

Traxxas 6890 Motor Plate Slash 4x4 This is a replacement Traxxas Motor Plate, and is intended for use with the Traxxas Slash 4x4 short course truck, Stampede 4x4, and the Telluride 4x4. Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas Stampede...

ECX 1018 Front Suspension Arm Set (AMP, Circuit, Ruckus, Torment)

ECX 1018 Front Suspension Arm Set (AMP, Circuit, Ruckus, Torment) This is a set of Front Suspension Arms from ECX intended for the 1/10 Scale 2WD AMP, Circuit, Ruckus, and Torment models. Features:Factory Replacement Arm Set Includes:(2) Front Suspension...

Dynamite 20T Brushed Motor (ECX AMP)

Dynamite 20T Brushed Motor (ECX AMP) Dynamite 20T Brushed Motor. This motor is a replacement for the EXC AMP Desert Buggy and Monster Truck vehicles. Specifications:Type: BrushedSize: 540Bearings or Bushings: Bushing# of Turns/Windings: 20TTiming:...

RC4WD King Kong Mini Tow Shackle

RC4WD King Kong Mini Tow Shackle This is the RC4WD King Kong Mini Tow Shackle. This 1/10 scale tow shackle matches the level of scale realism that you expect from RC4WD products. It is made from heavy duty steel and fits the RC4WD Small Scale Hook...

Pro-Line 5" PowerStroke XT Shocks

Pro-Line 5" PowerStroke XT Shocks Pro-Line 5” PowerStroke XT Shocks have a huge 5 inch length and arrive pre-built from the factory! Just add oil and they are ready for installation. The shocks include an extra set of dual rate springs to give you...

Team Associated B6 Aluminum "D" Arm Mount

Team Associated 91688 B6 Aluminum "D" Arm Mount Team Associated B6 Aluminum "D" Arm Mount. This is the replacement "d" arm mount for the RC10 B6 and B6D buggies.    Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6...

Schumacher Racing U4186 4mm Bando Belt (120T) (K1)

Schumacher Racing U4186 4mm Bando Belt (120T) (K1) This is a replacement Schumacher 4mm Bando Belt, and is intended for use with the Schumacher CAT K1 1/10 scale 4WD buggy. This belt connects the rear differential to the main layshaft.  ...

Traxxas Outer Driveshaft Assembly (1) 1/16 Summit

Traxxas 7251 Outer Driveshaft Assembly (1) 1/16 Summit This is a replacement Traxxas Outer Driveshaft Assembly, and is intended for use with the Traxxas 1/16 Summit. Traxxas 1/16 Summit  

Traxxas Inner Driveshaft Assembly 1/16 Summit

Traxxas 7250 Inner Driveshaft Assembly 1/16 Summit This is a replacement Traxxas Inner Driveshaft Assembly, inner (1) (fits front & rear, differential side), and is intended for use with the Traxxas 1/16 Summit. Traxxas 1/16...

Pro-Line 6070-02 Extended Body Mount Thumbwasher Kit (4)

Pro-Line 6070-02 Extended Body Mount Thumbwasher Kit (4) This is a replacement Pro-Line Body Mount Thumbwasher Kit, and is intended for use with the Traxxas Slash, Slash 4x4 and Team Associated SC10 equipped with the optional Pro-Line Extended Body...

Hot Racing YET38TC01 Aluminum Transfer Case Axial Yeti

Hot Racing YET38TC01 Aluminum Transfer Case Axial Yeti This is the optional Hot Racing's machined aluminum transfer case for the Axial Yeti Kit and RTR. Note: It is recommended to use a removable-type locking adhesive on screws threading into metal. This...

Team Losi Racing Driveshaft Rebuild Kit (TLR 22)

Team Losi Racing 2972 Driveshaft Rebuild Kit (TLR 22) This is a Team Losi Racing Driveshaft Rebuild Kit, intended for use with the Team Losi Racing 22 1/10 buggy. Includes: (2) CVA Barrels (4) Set Screws (4) Solid Pins Black Grease Thread...

Team Losi Racing 22 3.0 Wing Stay Set & Rear Bumper

Team Losi Racing 231035 22 3.0 Wing Stay Set & Rear Bumper Team Losi Racing 22 3.0 Wing Stay Set & Rear Bumper. This is the replacement wing mount and rear bumper. Package includes wing mount, wing shim, wing mount washers and rear bumper...

Twisted Skinz 1007 "Little Grim" 9 mil Chassis Protector (TLR 22 2.0)

Twisted Skinz 1007 "Little Grim" 9 mil Chassis Protector (TLR 22 2.0) Straight from the twisted mind of internationally renowned horror artist: George Silliman designed this authentic Twisted Skinz 1007 "Little Grim" (TLR 22 2.0) Pre-cut...

Twisted Skinz 1008 "Little Grim" 9 mil Chassis Protector (22SCT 2.0)

Twisted Skinz 1008 "Little Grim" 9 mil Chassis Protector (22SCT 2.0) Straight from the twisted mind of internationally renowned horror artist: George Silliman designed this authentic Twisted Skinz 1008 "Little Grim" (TLR 22SCT 2.0) Pre-cut...

Yokomo 14.7mm Socket Head Ball Stud Set (6) (Size L)

Yokomo 14.7mm Socket Head Ball Stud Set (6) (Size L) This is an optional Yokomo 14.8mm Socket Head Ball Stud Set.   Features: Steel Construction Factory Replacement Part   Includes: (6) Ball Studs Yokomo BD7 Yokomo BD7...

Yokomo YZ-2 Front Sway Bar Set

Yokomo YZ-2 Front Sway Bar Set This is an optional Yokomo Front Sway Bar Set. This front YZ-2 from sway bar set helps prevent the front from rolling to improve performance and steering response. This is especially effective in very high grip situations...

Yokomo 62mm YZ-2 Dirt/Carpet Universal Bone

Yokomo 62mm YZ-2 Dirt/Carpet Universal Bone This is a replacement Yokomo 62mm Universal Bone for the YZ-2 Dirt and Carpet editions. This bone is used with the 62mm Driveshaft Set (YOKZ2-010R2)    Features: Steel Construction Factory...

Yokomo YZ2 Dirt/Carpet Side Plate Set

Yokomo YZ2 Dirt/Carpet Side Plate Set This is a replacement Yokomo Side Guard Set for use with the YZ-2 Dirt and Carpet Editions.    Features: Plastic Construction Factory Replacement Part   Includes: (2) Side Plates Yokomo YZ-2 CA ...

Yokomo BD-500GOA Silicone Gear Differential O-Ring (Red)

Yokomo BD-500GOA Silicone Gear Differential O-Ring (Red)   This is a pack of four replacement Yokomo Gear Differential O-Rings.    Features: Factory Replacement Part Includes: (4) O-Rings Yokomo BD7 Yokomo BD7...

Yokomo B2-501GS Gear Differential Outdrive Set B-Max2

Yokomo B2-501GS Gear Differential Outdrive Set B-Max2 This is a replacement Yokomo Gear Differential Outdrive Set, and is intended for use with the Yokomo B-MAX2 MR and RS 1/10 scale buggies equipped with the optional Yokomo Gear Differential...

Traxxas Center Half Shafts (3.3) Revo, T-Maxx

Traxxas 5456 Center Half Shafts (3.3) Revo, T-Maxx This is a pack of two replacement center half shafts for the Traxxas Revo 3.3 monster trucks. Half shafts, center front (Revo 3.3) (internal splined (1)/ external splined (1)/ center rear (internal...

Yokomo YOKB2-501GG Gear Differential Gasket B-Max2

Yokomo YOKB2-501GG Gear Differential Gasket B-Max2 This is a replacement Yokomo Gear Differential Gasket, and is intended for use with the Yokomo B-MAX2 MR and RS 1/10 scale buggies equipped with the optional Yokomo Gear Differential (YOKB2-500GS)...

Yokomo 12mm Hex Front Axle (2) B-Max2

Yokomo 12mm Hex Front Axle (2) B-Max2 This is a pack of two replacement Yokomo 12mm Hex Front Axles. These are compatible with Yokomo B-Max2 vehicles equipped with the optional 12mm hex hub conversion kit (YOKB2-HCOV)   Features: Steel...

Team Losi Racing 5065 Bleeder Shock Cap Set (2) (TLR 22/22T)

Team Losi Racing 5065 Bleeder Shock Cap Set (2) (TLR 22/22T) This is an optional Team Losi Racing Bleeder Shock Cap Set, and is intended for use with the TLR 22 and 22T vehicles. These aluminum shock caps will allow you to rebuild your 22 shocks much...