CRC 4020 Wire Keeper (3)
This is pack of three replacement Calandra Racing Concepts Wire Keepers. This set includes three black ties, plus six plastic tie keepers. Each keeper features a stick back allowing them to be secured down.
CRC 17571 Graphite Front Bumper (X10LE)
This is a replacement CRC Graphite Front Bumper, and is intended for use with the CRC Gen-X10LE. This will fit both versions of the Gen-X10 chassis and Battle Axe. This works very well for mounting oval truck...
CRC 3393 1/10 Front End Spring 8 x .50mm
CRC 8x.50mm Front End Spring. Package includes two springs.
CRC 3287 Nylon Spring Cup
Nylon Spring cups to accept progressive springs (CLN1295 - CLN1299) when using 1/10th king pins (CLN3228) on the Pro-Strut front end.
Includes:(4) Nylon Spring Cups
Calandra Racing Concepts 3280 Clamping One-Piece Side Links (2)
This is a set of two CRC Clamping One-Piece Side Links, and are intended for use with the Gen-X 10 and Battle Axe pan cars. These longer one-piece links with ball clamps allow you to adjust...
CRC 3251 Steering Block Set
This is a set of Pro-Strut Steering Blocks with adjusters.
Calandra Racing Concepts 3235 Dual Front Axle (2)
Dual Axle for the CRC Pro-Strut Front End (pr). Allows inline or trailing setup.
Calandra Racing Concepts 3228 King Pin Long
Long king pins for the Pro-Strut Front end to use longer springs for 10th scale cars.
Calandra Racing Concepts 1229 1/8" Differential Balls (100)
This is a pack of 100 replacement 1/8" differential balls from Calandra Racing Concepts. These can be used in any application that requires an 1/8" differential ball.
Calandra Racing Concepts 1228 3/32 Diff Balls (100)
CRC 3/32 Diff Balls. These are used in a variety of CRC models, and may be compatible with other cars as well. Package includes one hundred diff balls.
CRC 3234 Brass 4-40 Set Screws (4)
These 4-40 brass set screws are used to lock the king pin in the steering block. The softer brass material prevents damage to the hardened king pin.
Soft Brass Prevents Damage to...
Calandra Racing Concepts 5017 Pinion Tree
This is Pinion Tree from Calandra Racing Concepts. This all new design sports pinion storage on all four sides which allows you to store a huge range of gears. The tree holds 46 - 67 tooth gears and...
Calandra Racing Concepts 1248 1/8 x 5/16 Flanged Bearings (10)
This is a set of 1/8 x 5/16 Flanged Bearings from Calandra Racing Concepts.
Includes:(10) Flanged Bearings
Calandra Racing Concepts 1386 1/4x3/8" Flanged Axle Bearings (10)
1/4 x 3/8 Flanged Axle bearing (10) - used for rear axle on 12th & 10th pan cars.
Includes:(10) Flanged Axle Bearings
CRC RT-1 Front & Rear Mounted GTR Rim Rubber Tire (4)
Pre-glued belted radial rubber tires from CRC for World GT-R and rubber tire oval racing, ready to run!
Fits most all modern 1/10th pan cars (remember, tire alone fits F1, not the...
Calandra Racing Concepts Body Post Set with Collars
Also see Duratrax Body Post Sets Here for additional stock of body post lengths
Black Nylon construction
2 Body mounts
2 Collars for height
CRC 64 Pitch Spur Gear
Calandra Racing 64 Pitch 16 Ball Pan Car Spur Gear. This spur gear uses 16 3/32" diff balls rather than 6 to 12 1/8" balls. This is done to reduce weight and maintenance by increasing the surface contact area, so less tension is...
"Gold Standard" Aluminum Machined 64 Pitch Pinion Gear
The "Gold Standard" in pinions. CRC's new pinion gears are super lightweight, true, and precision CNC machined in 7075 aluminum. CRC has completely removed all unnecessary material in an effort to...