Custom Works Truespeed 48P Spur Gear (81T)

Custom Works Truespeed 48P Spur Gear Features:PlasticThese spur gears are available in a variety of sizes to tune your roll out for specific track conditions Includes:(1) 81 Tooth, 48 pitch spur Intimidator 7 Intimidator 7 DD Outlaw...

Custom Works 7281 12mm Clamping HEX for 5mm Axle 8.0mm Offset

Custom Works 7281 12mm Clamping HEX for 5mm Axle 8.0mm Offset   This is a pack of two optional Custom Works 12mm Outlaw 4 Clamping Hexes with a +8mm Offset. Features: Aluminum L: 12mm Includes: (2) Clamping HEX Outlaw...

Custom Works 7280 12mm Clamping Hex for 5mm Axle 5.5mm Offset (2)

Custom Works 7280 12mm Clamping Hex for 5mm Axle 5.5mm Offset (2)   This is a pack of two optional Custom Works 12mm Outlaw 4 Clamping Hexes with a +5.5mm Offset. These hexes are for use with 5mm Axles...

Custom Works 7277 Drive Pin for Hex Axle (6)

Custom Works 7277 Drive Pin for Hex Axle (6)   This is a pack of six replacement Custom Works Outlaw 4 Hex Drive Pins.   Features: Steel Includes: (6) Drive Pins Outlaw 4 Rocket Stage 4

Custom Works 7276 Rear Molded HEX

Custom Works 7276 Rear Molded HEX   This is a pack of four replacement Custom Works 12mm Outlaw 4 Plastic Rear Molded Axle Hexes.  Features: Plastic L: 12mm Includes: (4) Rear Molded HEX Rocket Stage 4 Outlaw 4...

Custom Works 7275 CVA Drive Bone (1)

Custom Works 7275 CVA Drive Bone (1)   Custom Works Outlaw 4 CVA Bone. Package includes one replacement CVA bone.  Features: Steel L: 2 3/4" (7 mm) Includes: (1) CVA Drive Bone Outlaw 4 Rocket Stage 4

Custom Works 7277 Crush Tube for 5mm Axle (2)

Custom Works 7277 Crush Tube for 5mm Axle (2)   This is a pack of two replacement Custom Works 5mm Axle Crush Tubes for the Outlaw 4.  Features: Aluminum Fits 5mm Axle Includes: (2) Crush Tubes Rocket Stage 4 Outlaw 4...

Custom Works 7272 CVA Drive Axle

Custom Works 7272 CVA Drive Axle   Custom Works Outlaw 4 5mm Rear Axle. This is a replacement 5mm rear axle for the Outlaw 4 chassis.   Features: Steel L: 1.5" (4mm) Includes: (1) CVA Drive Axle Rocket Stage...

Custom Works 7270 CVA Rebuild Kit

Custom Works 7270 CVA Rebuild Kit   This is a replacement Custom Works Outlaw 4 CVA Rebuild Kit, including barrels, pins and set screws. This kit includes the parts to service two CVA's.   Features: Steel Parts and Hardware...

Custom Works 7269 CVA Driveshaft Kit

Custom Works 7269 CVA Driveshaft Kit   Custom Works Outlaw 4 CVA Kit. Package includes the parts needed to build two complete CVD driveshafts.   Features: Aluminum Steel Includes: (2) CVA Collars (2) CVA Driveshafts (2)...

Custom Works 7259 Front Axel HEX Spacer +3mm Offset

Custom Works 7259 Front Axel HEX Spacer +3mm Offset   This is an optional Custom Works Outlaw 4 Front Axle Hex Spacer with a plus 3mm Offset. Features: Aluminum L: 12mm Includes: (1) Front Axel HEX Spacer Outlaw 4...

Custom Works 7259 Aluminum Front Axel 12mm HEX 5mm Offset

Custom Works 7259 Aluminum Front Axel 12mm HEX 5mm Offset   Custom Works Outlaw 4 Aluminum 12mm Hex Front Axle. This axle has a +5mm offset. Package includes one axle. Features: Aluminum L: 1" (25.4mm) Includes: (1)...

Custom Works 7220 Front Axle Spacers (8)

Custom Works 7220 Front Axle Spacers (8)   Custom Works Front Axle Spacers. This is a replacement for the Intimidator 7, Enforcer 7, Outlaw 3 and Rocket Stage 3 kits.  Features: Plastic Includes: (8)Front Axel...

Custom Works 7219 Hex Driver CVA Collar (2)

Custom Works 7219 Hex Driver CVA Collar (2)   Custom Works Hex Drive Axle CVA Collars.   Features: Aluminum W: 1/2" (12.7mm) Includes: (2) CVA Collars Outlaw 4 Rocket Stage 4

Custom Works 5217 4-40 Steel Locknut

Custom Works 5217 4-40 Steel Locknut   This is a pack of eight Custom Works 4/40 Steel Locknuts, intended for use with Outlaw 4 and Rocket 4 kits. Features: Steel Includes: (8) 4/40 Steel Locknuts Outlaw 4 Rocket Stage 4...

Custom Works 4581 81 Tooth Spur Gear 48 Pitch (1)

Custom Works 4581 81 Tooth Spur Gear 48 Pitch (1)   Custom Works 81T 48 Pitch Slipper Spur Gear. Features: Plastic Predrilled Holes 81 Tooth 48 Pitch Includes: (1) Spur Gear Outlaw 4 Rocket Stage 4 Enforcer...

Custom Works 4486 2.6 Slipper Pad (2)

Custom Works 4486 2.6 Slipper Pad (2)   The Custom Works 2.6 Slipper Pad Set is a replacement for Custom Works kits equipped with the 2.6 transmission.  Features: Cardboard L: 1.05" (26.67 mm) W: 1.05" (26.67 mm) ID: 0.6" (15.24...