Traxxas 3170X 4-Cell Battery Holder w/Switch, Nitro Stampede

Traxxas 3170X 4-Cell Battery Holder w/Switch, Nitro Stampede This is a replacement Traxxas 4-cell battery holder with wired on/off switch, wired connector plug, a switch face-plate, and two mounting screws.  Traxxas Nitro 4-Tec Traxxas Nitro...

Traxxas 3166 66T Spur Gear 32P, Emaxx, Nitro Stampede

Traxxas 3166 66T Spur Gear 32P, Emaxx, Nitro Stampede This is a replacement 64T 32 pitch spur gear from Traxxas. The spur gear is the gear that the clutch bell on the engine meshes with. Traxxas E-Maxx Traxxas Nitro Stampede  

Team Losi Racing 22 3.0 55mm HD Turnbuckle Set (2)

Team Losi Racing 234060 22 3.0 55mm HD Turnbuckle Set (2) Team Losi Racing 22 3.0 55mm HD Turnbuckle Set. These are the replacement 22 3.0 55mm turnbuckles, but are also compatible with the 22-4 1/10 4wd buggy. Package includes two turnbuckles and four...

Team Losi Racing 22 3.0 50mm HD Turnbuckle Set (2)

Team Losi Racing 234059 22 3.0 50mm HD Turnbuckle Set (2) This is a pack of two replacement Team Losi Racing 50mm HD Turnbuckles. These are the replacement 22 3.0 50mm turnbuckles, but are also compatible with the 22-4 1/10 4wd buggy. Includes:(2)...

ECX 234000 Caster Block/Steering Block/Rear Hub Set, All 2wd

ECX 234000 Caster Block/Steering Block/Rear Hub Set, All 2wd This is a factory replacement set of Caster Blocks, Steering Blocks and Rear Hub Set intended for the ECX Amp, Torment, Ruckus, Circuit, and Boost vehicles. Features:Factory Replacement...

Traxxas 4622 Slipper Pressure Rings (2) Emaxx, Nitro Rustler, Nitro Slash, Nitro Stampede

Traxxas 4622 Slipper Pressure Rings (2) Emaxx, Nitro Rustler, Nitro Slash, Nitro Stampede This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side the differential...

Team Associated 12mm Clamping Hex (SC10 Rear) Aluminum

These are upgrade wheel hex from Team Associated This is an optional Team Associated 12mm Aluminum Clamping Wheel Hex Set. These hexes are used on the rear of the Team Associated SC10 1/10 scale short course truck, as well as the front and rear of the...

ECX RC 9001 Metal Transmission Gear Set

This is an optional ECX Metal Transmission Gear Set This is intended for use with the ECX RC Circuit, Ruckus, Boost and Torment 2wd vehicles. Each set offers increased strength compared to the stock gears providing a perfect complement to higher...

ECX 1029 Top Plate, Circuit, AMP

ECX 1029 Top Plate, Circuit, AMP This is a factory replacement Top Plate from ECX intended for the Amp, Boost, and Circuit Models. Features:Factory Replacement Top Plate Includes:(1) Top Plate ECX AMP Desert Buggy ECX AMP Monster Truck ECX Boost ECX...

Traxxas 3678 Wheelie Bar Assembly (Stampede)

Traxxas 3678 Wheelie Bar Assembly (Stampede) The unique patented Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit. The wheelie bar...

Traxxas 48P Spur Gear (45T)

Traxxas 7045R 48P Spur Gear (45T) Spur gear, 45-tooth Traxxas 1/16 E-Revo Traxxas 1/16 E-Revo VXL Traxxas 1/16 Slash Traxxas 1/16 Summit  

Traxxas Heavy Duty Rear Driveshaft Assembly Stampede

Traxxas 6852X Heavy Duty Rear Driveshaft Assembly Stampede This is a replacement Traxxas Heavy Duty Rear Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4 in addition to other Traxxas vehicles. This package includes the parts...

JConcepts 0314 B6/B6D "S2" Body w/6.5" Aero Wing (Clear)

JConcepts 0314 B6/B6D "S2" Body w/6.5" Aero Wing (Clear) The JConcepts B6/B6D "S2" Body combines familiar features with a low-profile stance. The S2 is a performer straight out of the package, with the Aero rear wing to help deliver results on any track...

Team Associated 91465 Gear Differential Outdrive (2) B5, B5M, B6, B6D, SC5M, T5M

Team Associated 91465 Gear Differential Outdrive (2) B5, B5M, B6, B6D, SC5M, T5M This is a pack of two replacement Team Associated Gear Differential Outdrives.    Includes:(2) Outdrives

ECX 1/18 Ruckus Front/Rear Premount Tires (2)

ECX 1/18 Ruckus Front/Rear Premount Tires (2) This is a set of Pre-Mounted Tires for the ECX 1/18 Scale Ruckus. Features: 4WD Front or Rear Compatible Pre-Mounted on Black Wheels 1/18 Scale Includes:(2) Pre-Mounted Ruckus Tires ECX 1/18 Ruckus ...

ECX 1028 Servo Saver Set 2wd All

ECX 1028 Servo Saver Set 2wd All This is a factory replacement Servo Saver Set from ECX intended for the Amp, Boost, Circuit, Ruckus, and Torment 2WD models. Features:Factory Replacement Servo Saver Set Includes:(1) Servo Saver Set Optional...

Traxxas Steering Linkage Revo 3.3

Traxxas 5341 Steering Linkage Revo 3.3 This is a replacement steering linkage set for the Traxxas Revo monster truck. This linkage set contains all of the necessary turnbuckles, rod ends, and hollow balls to install into your Revo. Traxxas E-Revo...

Traxxas 2754 Stub Axle Pins (4)

Traxxas 2754 Stub Axle Pins (4) This is a set of four replacement rear axle stub pins from Traxxas. These axle stub pins go through the axle stub, and lock into the wheel hubs. Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas...

Axial 80078 Transmission Spur Gear Cover (SCX10, AX10)

Axial 80078 Transmission Spur Gear Cover (SCX10, AX10) This is an optional Axial Transmission Spur Gear Cover, and is intended for use with the Axial SCX10 and AX10 Scorpion vehicles. Features: Fits all Axial SCX10 and AX10 transmissions Helps Keep...

Axial 30435 Steel Outdrive Shaft Set (Wraith) (2)

Axial 30435 Steel Outdrive Shaft Set (Wraith) (2) This is a replacement Axial Steel Outdrive Shaft Set, and is intended for use with the Axial Wraith. Features: Factory Replacement Shaft Set Steel Construction for Durability Black oxide coating to...

Axial 30190 Shaft 5x18mm (2)

Axial 30190 Shaft 5x18mm (2) This is a pack of two replacement 5x18mm shafts from Axial. This shaft is used as an idler shaft in the transmission. Features:Factory Replacement Part Includes:(2) 5x18mm Shafts Axial AX10 Axial SCX10 Axial...

Axial 089 M3x25mm Cap Head Screws (10)

Axial 089 M3x25mm Cap Head Screws (10) This is a pack of ten 3x25mm cap screws from Axial. Features:Factory Replacement Part Includes:(10) 3x25mm Cap Head Screws Axial AX10 Axial SCX10 Axial SMT10 Axial Wraith Rock Racer Axial Yeti Rock...

Team Associated 0.030 Nylon Washer

Team Associated 4187 Nylon Axle/Shock/Hub Carrier Spacer   This is a pack of nylon front axles spacers for Team Associated trucks and buggies. You can also use these to adjust the camber link locations under the ball studs.   Team...

Team Associated 5mm Long Ball Stud (10)

Team Associated 31283 5mm Long Ball Stud (10) This is a pack of ten replacement Team Associated 5mm Long Ball Studs. Team Associated RC10 B6 Team Associated RC10 B6D Team Associated RC10 R5 Team Associated RC12 R5 Team Associated RC12 R6 Team...

Team Losi Racing Body Mount Set 22 SCT 2.0/3.0

Team Losi Racing 231030 Body Mount Set 22 SCT 2.0/3.0 This is a replacement Team Losi Racing Body Mount Set.  Features:Plastic construction Includes:Body Mount Set Team Losi Racing 22SCT 2.0 Team Losi Racing 22SCT 3.0  

Traxxas Aluminum Motor Plate (Blue)

Traxxas 6890X Aluminum Motor Plate (Blue) The machined Aluminum Motor Plate offers rock-solid mounting security for major horsepower in all Slash 4X4 and 1/10 Rally models. Brilliant anodizing with bright aluminum highlights show off the artfully...

Traxxas Motor Plate Slash 4x4

Traxxas 6890 Motor Plate Slash 4x4 This is a replacement Traxxas Motor Plate, and is intended for use with the Traxxas Slash 4x4 short course truck, Stampede 4x4, and the Telluride 4x4. Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas Stampede...

ECX 1018 Front Suspension Arm Set (AMP, Circuit, Ruckus, Torment)

ECX 1018 Front Suspension Arm Set (AMP, Circuit, Ruckus, Torment) This is a set of Front Suspension Arms from ECX intended for the 1/10 Scale 2WD AMP, Circuit, Ruckus, and Torment models. Features:Factory Replacement Arm Set Includes:(2) Front Suspension...

Dynamite 20T Brushed Motor (ECX AMP)

Dynamite 20T Brushed Motor (ECX AMP) Dynamite 20T Brushed Motor. This motor is a replacement for the EXC AMP Desert Buggy and Monster Truck vehicles. Specifications:Type: BrushedSize: 540Bearings or Bushings: Bushing# of Turns/Windings: 20TTiming:...

RC4WD King Kong Mini Tow Shackle

RC4WD King Kong Mini Tow Shackle This is the RC4WD King Kong Mini Tow Shackle. This 1/10 scale tow shackle matches the level of scale realism that you expect from RC4WD products. It is made from heavy duty steel and fits the RC4WD Small Scale Hook...

Pro-Line 5" PowerStroke XT Shocks

Pro-Line 5" PowerStroke XT Shocks Pro-Line 5” PowerStroke XT Shocks have a huge 5 inch length and arrive pre-built from the factory! Just add oil and they are ready for installation. The shocks include an extra set of dual rate springs to give you...

Team Associated B6 Aluminum "D" Arm Mount

Team Associated 91688 B6 Aluminum "D" Arm Mount Team Associated B6 Aluminum "D" Arm Mount. This is the replacement "d" arm mount for the RC10 B6 and B6D buggies.    Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6...

Schumacher Racing U4186 4mm Bando Belt (120T) (K1)

Schumacher Racing U4186 4mm Bando Belt (120T) (K1) This is a replacement Schumacher 4mm Bando Belt, and is intended for use with the Schumacher CAT K1 1/10 scale 4WD buggy. This belt connects the rear differential to the main layshaft.  ...

Team Losi Racing 1554 Steering Servo Horn Set (TLR 22)

Team Losi Racing 1554 Steering Servo Horn Set (TLR 22) This is a Team Losi Racing Steering Servo Horn Set, intended for use with the Team Losi Racing 22 vehicles.    Features: Plastic Construction Factory Replacement Part   Includes:...

Traxxas Outer Driveshaft Assembly (1) 1/16 Summit

Traxxas 7251 Outer Driveshaft Assembly (1) 1/16 Summit This is a replacement Traxxas Outer Driveshaft Assembly, and is intended for use with the Traxxas 1/16 Summit. Traxxas 1/16 Summit  

Traxxas Inner Driveshaft Assembly 1/16 Summit

Traxxas 7250 Inner Driveshaft Assembly 1/16 Summit This is a replacement Traxxas Inner Driveshaft Assembly, inner (1) (fits front & rear, differential side), and is intended for use with the Traxxas 1/16 Summit. Traxxas 1/16...