Traxxas 7244 GTR Shock Spring Set (2.77 Rate - Pink) (2)

Traxxas 7244 GTR Shock Spring Set (2.77 Rate - Pink) (2) This is an optional Traxxas GTR Shock Spring Set, and is intended for use with the Traxxas 1/16 Summit, 1/16 Slash, 1/16 E-Revo and 1/16 Grave Digger trucks.  Features: Optional Spring...

Traxxas 8958 Rod Ends, Maxx

Traxxas 8958 Rod Ends, Maxx This is a pack of four replacement Traxxas Rod Ends for the Traxxas Maxx. These rod ends are pre-assembled with steel pivot balls. These are replacement ends for #8547A, 8547R, 8547X, 8948A, 8948G, 8948R, 8948X, 8997A, 8997G,...

Traxxas 8951 4x15.8mm Drive Cup & Screw Pin, Maxx

Traxxas 8951 4x15.8mm Drive Cup & Screw Pin, Maxx This is a replacement Traxxas Maxx 4x15.8mm Drive Cup & Screw Pin, intended for use with the Maxx 1/10 Brushless Monster Truck. Use only with TRA8950X, TRA8950A driveshafts. Features:Factory...

Traxxas 8539 Rear Axle Shaft, Unlimited Desert Racer

Traxxas 8539 Rear Axle Shaft, Unlimited Desert Racer This is a replacement Traxxas Rear Axle Shaft for the Unlimited Desert Racer. Features:Factory Replacement Rear Axle Shaft Includes:(1) Rear Axle Shaft   Traxxas Unlimited Desert...

Traxxas 7422 Low-CG Chassis, Rally/Slash 4x4 Ultimate

Traxxas 7422 Low-CG Chassis, Rally/Slash 4x4 Ultimate This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short course truck. Features: Factory Replacement Chassis...

Traxxas 8892 Sealed Ball Bearing Set TRX-4 Traxx

Traxxas 8892 Sealed Ball Bearing Set TRX-4 Traxx This is the factory replacement Traxxas Sealed Ball Bearing Set intended for use with the Traxxas Traxx TRA8880. This bearing set is good for use with one pair of Traxx (front or rear)...

Traxxas 7132 Rear Suspension Arm Set, 1/16 E-Revo

Traxxas 7132 Rear Suspension Arm Set, 1/16 E-Revo This is a replacement Traxxas Rear Suspension Arm Set.  Features:Factory Replacement Suspension Arm Set Includes: (2) Upper Suspension Arms (Right & Left) (2) Lower Suspension Arms (Right...

Traxxas 5099A 6x16x5mm Ball Bearing (2)

Traxxas 5099A 6x16x5mm Ball Bearing (2) This is a replacement set of two Traxxas 6x16x5mm Ball Bearings, intended for use with the Maxx 1/10 Brushless Monster Truck.    Features:Factory Replacement Ball Bearings   Includes: (2) 6x16x5mm...

Traxxas 8940X Hardened Steel Complete Suspension Pin Set (10) Maxx

Traxxas 8940X Hardened Steel Complete Suspension Pin Set (10) Maxx This is a pack of Traxxas Hardened Steel Complete Suspension Pin Set, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck.   Features: Hardened Steel Construction...

Traxxas 8963 Steel Shock Shaft 72mm (2)

Traxxas 8963 Steel Shock Shaft 72mm with Rod Ends (2) This is a replacement pack of Traxxas 72mm GT-Maxx Steel Shock Shaft with a chrome finish with Rod Ends   Features: Factory Replacement Shock Shafts Steel Construction Chrome...

Traxxas 8547 Front Toe Links (2), Unlimited Desert Racer

Traxxas 8547 Front Toe Links (2), Unlimited Desert Racer This is a pack of two replacement Traxxas Unlimited Desert Racer Front Toe Links. Features:Factory Replacement Toe Links Includes:(2) Front Toe Links Traxxas Unlimited Desert...

Traxxas 7717X Battery Compartment & Foam Spacer Set, X-Maxx

Traxxas 7717X Battery Compartment & Foam Spacer Set,  X-Maxx This is a replacement battery compartment spacer set for the Traxxas X-Maxx. Package contains two spacers, four foam pads, and two foam blocks. Features:Factory Replacement Battery...

Traxxas 7029X Rear Bulkhead w/ Hardware, 1/16

Traxxas 7029X Rear Bulkhead w/ Hardware, 1/16 This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas 1/16 E-Revo and Slash. This bulkhead includes the left and right halves to make one bulkhead, as well as the necessary...

Traxxas 7744 Front & Rear Skidplate w/Rubber Impact Cushion, X-Maxx

Traxxas 7744 Front & Rear Skidplate w/Rubber Impact Cushion, X-Maxx This is a replacement Traxxas X-Maxx Skidplate Set. This set includes one front and one rear skidplate, as well as the impact cushions that help absorb the energy from heavy impacts,...

Pro-Line 6063-02 PowerStroke Shock Rebuild Kit (Slash)

Pro-Line 6063-02 PowerStroke Shock Rebuild Kit (Slash) This is a Pro-Line PowerStroke Shock Rebuild Kit, and is intended for use with the Pro-Line Slash PowerStroke shock kit. This kit includes the parts needed to rebuild two PowerStroke shocks...

Traxxas 2546 4x15mm Flat Head Screws (6)

Traxxas 2546 4x15mm Flat Head Screws (6) This is a pack of six Traxxas 4x15mm Countersunk Screws, and are intended for use with the Traxxas Stampede, Rustler, Slash and Slash 4x4 vehicles. Features:Factory Replacement Screw Set Includes:(6) 4x15mm Flat...

Traxxas 8545 Front Suspension Pin Set, Unlimited Desert Racer

Traxxas 8545 Front Suspension Pin Set, Unlimited Desert Racer This is a replacement Traxxas Unlimited Desert Racer Front Suspension Pin Set. This pin set includes two 3x51mm links, two 3x54mm links and two 3x93mm links. Features:Factory Replacement...

Traxxas 8969 Shock Springs 1.725 Rate

Traxxas 8969 Shock Springs 1.725 Rate This is an optional Traxxas GT-Maxx Shock Springs, intended for use with the Maxx 1/10 Monster Truck. These springs have a 1.725 rate and a natural finish. Features: Optional Shock Springs 1.725 Rate Natural Finish ...

Traxxas 3677 Wheelie Bar Mount, Slash/Stampede/Rustler/Bandit

Traxxas 3677 Wheelie Bar Mount, Slash/Stampede/Rustler/Bandit This is an optional wheelie bar mount from Traxxas. Features:Factory Option Wheelie Bar Mount Includes:(1) Wheelie Bar Mount   Traxxas Bandit Traxxas Bandit VXL Traxxas Bigfoot Traxxas...

Traxxas 7751X Constant Velocity Driveshaft Rebuild Kit (use with TRA7750X) X-Maxx

Traxxas 7751X Constant Velocity Driveshaft Rebuild Kit (use with TRA7750X)  X-Maxx   This is the Traxxas X-Maxx Constant Velocity Driveshaft Rebuild Kit for use with the X-Maxx Heavy Duty Driveshafts (TRA7750X). Kit includes the parts to...

Traxxas 8996A Steel Constant Velocity WideMaxx Driveshaft 109.5mm, Maxx

Traxxas 8996A Steel Constant Velocity WideMaxx Driveshaft 109.5mm, Maxx This is a set of steel constant-velocity driveshafts from Traxxas intended specifically to be utilized with the TRA8995* WideMaxx suspension kit. *Note: These required parts...

Traxxas 8949 Front/Rear Differential Output Yoke Assembly, Maxx

Traxxas 8949 Front/Rear Differential Output Yoke Assembly, Maxx This is a replacement Traxxas Maxx Differential Output Yoke, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This differential output yoke assembly is for front or rear and...

Traxxas 7034 Left & Right Axle Carriers, 1/16

Traxxas 7034 Left & Right Axle Carriers, 1/16 This is a set of replacement Traxxas axle carriers, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Features:Factory Replacement Axle Carriers Includes: (2) Left Axle...

Traxxas 6465 Cush Drive Key Pin & Elastomer Damper Set, Revo 2.0

Traxxas 6465 Cush Drive Key Pin & Elastomer Damper Set, Revo 2.0 This is a replacement Traxxas Cush Drive Key Pin & Elastomer Damper Set, and is intended for use with the Traxxas X0-1. Features:Factory Replacement Parts Includes: (1)...

Traxxas 7736 Rear Bumper, X-Maxx

Traxxas 7736 Rear Bumper,  X-Maxx This is a replacement Traxxas X-Maxx Rear Bumper. Features:Factory Replacement Bumper Includes:(1) Rear Bumper Traxxas X-Maxx  

Hot Racing STRF470 Steel Spur Gear (70T 48P), 4-Tec 2.0

Hot Racing STRF470 Steel Spur Gear (70T 48P), 4-Tec 2.0 Hot Racing light weight hardened steel 70 tooth, 48 pitch spur gear for the Traxxas 4 TEC 2 vehicles. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur...

Hot Racing STRF462 Steel Spur Gear (62T 48P), 4-Tec 2.0

Hot Racing STRF462 Steel Spur Gear (62T 48P), 4-Tec 2.0 Hot Racing light weight hardened steel 62 tooth, 48 pitch spur gear for the Traxxas 4 TEC 2 vehicles. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur...

Hot Racing STRF455 Steel Spur Gear (55t 48p), 4-Tec 2.0

Hot Racing STRF455 Steel Spur Gear (55t 48p), 4-Tec 2.0 Hot Racing light weight hardened steel 55 tooth, 48 pitch spur gear for the Traxxas 4-Tec 2.0 vehicles. Features: CNC machined and lightened hardened steel construction Replaces stock nylon...

Hot Racing STRF448 Speed Run Steel Spur Gear (48t 48p), 4-Tec 2.0

Hot Racing STRF448 Speed Run Steel Spur Gear (48t 48p), 4-Tec 2.0 Hot Racing light weight hardened steel 48 tooth Speed Run Gear, 48 pitch spur gear for the Traxxas 4 TEC 2 vehicles. Features: CNC machined and lightened hardened steel...

Hot Racing MTT15EP HD Slipper Pressure Plate and Hub for Losi Mini-T 2.0

Hot Racing MTT15EP HD Slipper Pressure Plate and Hub for Losi Mini-T 2.0 Hot Racing large heavy duty CNC machined anodized aluminum slipper pressure plate and hub for Losi Mini-T2 . Features: CNC machined aluminum construction Integrated cooling cut out...

Hot Racing MTT2101 Aluminum Front Knuckle Spindle, Mini-T 2.0

Hot Racing MTT2101 Aluminum Front Knuckle Spindle, Mini-T 2.0 Hot Racing aluminum Front Knuckle / spindle set steering arms for the Losi 2WD Mini-T2. Features: Use oversize 4x8x3 Rubber Shielded ball Bearing CNC machined aluminum, anodized block...

Hot Racing MTT30FS148 Linear Rate Front Spring Set, Losi Mini-T 2.0

Hot Racing MTT30FS148 Linear Rate Front Spring Set, Losi Mini-T 2.0 Hot Racing factory spec Linear rate front shock springs for the Losi Mini-T2 vehicles Features: Spring steel construction Hard, Medium, and Soft Replaces Losi Stock LOS214015 ...

Hot Racing MTT40FS148 Linear Rate Rear Spring Set, Losi Mini-T 2.0

Hot Racing MTT40FS148 Linear Rate Rear Spring Set, Losi Mini-T 2.0 Hot Racing factory spec Linear rate rear shock springs for the Losi Mini-T2 vehicles Features: Spring steel construction Hard, Medium, and Soft Replaces Losi Stock LOS214014 ...

Hot Racing MTT5601 Aluminum Rear Arm Set, Losi Mini-T 2.0

Hot Racing MTT5601 Aluminum Rear Arm Set, Losi Mini-T 2.0 Hot Racing aluminum Rear Lower arms for the Losi 2WD Mini-T2. Features: CNC machined aluminum, anodized black. Replaces worn stock black plastic Rear Arm Precision made for perfect bolt-on fit...

Hot Racing MTT5501 Aluminum Front Arm Set, Losi Mini-T 2.0

Hot Racing MTT5501 Aluminum Front Arm Set, Losi Mini-T 2.0 Hot Racing aluminum Front Lower arms for the Losi 2WD Mini-T2. Features: CNC machined aluminum, anodized black. Replaces worn stock black plastic Front Arm Precision made for perfect bolt-on fit...

Hot Racing MTT18A01 Adjustable Aluminum Motor Mount, Mini-T 2.0

Hot Racing MTT18A01 Adjustable Aluminum Motor Mount,  Mini-T 2.0 This is the optional Adjustable Aluminum Motor Mount for the Losi 2WD Mini-T2. Features: Replaces stock Non-adjustable motor mount for a much wider range of Gear Ratio. Improves...