This is the Mamba Monster 2 25V Electronic Speed Control from
Waterproof design allows running in nearly any environment (see COMMENTS below)
USB programming capability via the Castle Link USB adapter (CSEM6300)
Solder posts allow battery wire length and direction to be easily changed
Compatible with on-road cars, buggies, truggies, and monster trucks running up to 6S LiPo batteries and weighing up to 15lbs (6.8kg)
- Mamba Monster 2 25V ESC with Cooling Fan
- On/Off Switch
- Fan Plug
- Motor Wires
- Receiver Wire with Connector
Input Voltage: 2S-6S LiPo
Max Continuous Amperage: 120A full continuous operation with cooling airflow
BEC: User selectable output between 5 and 7 volts
Reversible: Yes, with lockout
Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
Weight: 3.93oz (111.5g) without battery connector
Not intended for use while submerged in liquid. If operated in wet conditions, rinse with fresh water to remove dirt or corrosives then fully dry unit.
Fan is not water resistant.
Remove fan from ESC before exposing vehicle to liquids.
- 1/8 Scale