Traxxas 2968X iD Lipo Battery Voltage Checker/Balancer w/TRA2938X Lead Adapter

Traxxas 2968X iD Lipo Battery Voltage Checker/Balancer w/TRA2938X Lead Adapter The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual...

Traxxas 2938X iD LiPo Battery Balance Lead Adapter

Traxxas 2938X iD LiPo Battery Balance Lead Adapter The Traxxas Balance Lead Adapter connects batteries to the accessory LiPo Cell Voltage Checker (#2968) to check battery charge status and individual cell voltages. View LiPo cell status and overall...

ProTek RC 5010 Male JST Style Connectors (4)

ProTek RC 5010 Male JST Style Connectors (4) This is a pack of four male JST style connectors. These are unassembled, and can be used to repair a bad JST connector lead, or to construct your own JST leads. Includes:(4) Male JST Style Connectors

ProTek RC 5011 Female JST Style Connectors (4)

ProTek RC 5011 Female JST Style Connectors (4) This is a pack of four female JST style connectors. These are unassembled, and can be used to repair a bad JST connector lead, or to construct your own JST leads. Includes:(4) Female JST Style Connectors

Punisher Series 2S High Amp Charge Cable 3ft 4mm/5mm Step Bullet Connector

Punisher Series 2S High Amp Charge Cable 3ft 4mm/5mm Step Bullet Connector The Punisher Series 2S High Current Charge/Balance cable is the solution you've been waiting for to charge your battery more than 6 inches away from your charger. Featuring...

Punisher Series Low Profile 4mm Gold Plated Bullet Connector

Punisher Series Low Profile 4mm Gold Plated Bullet Connector We have designed these 4mm Low Profile Bullet Connectors with pure performance in mind. Each Bullet has a "Step" machined into them where the bullet relief joints are located. This keeps the...

Punisher Series EC3 Male to EC5 Female Adapter

Punisher Series EC3 Battery to EC5 Device Adapter   Tired of cutting wires and soldering connectors? This convenient adapter from Punisher Series allows you to connect a battery with with an EC3 plug into an ESC equipped with an EC5 plug. Note:...

Arrma 390195 XT90 to T-Plug Charging Adapter Lead

Arrma 390195 XT90 to T-Plug Charging Adapter Lead This XT90 Male to Female T-Plug Charging Adaptor allows you to charge your XT90 equipped battery back using a charger that has a T-Plug output. Includes:(1) Charging Adapter Lead

Maclan Racing XT90 Connectors (3 pair)

Maclan Racing XT90 Connectors (3 pair) These authentic XT90 connectors are ideal for ESC/battery connection. Features: Authentic 3 male and 3 female XT90 connectors Best for RC ESC and battery Includes: (3) Male XT90 Connectors (3) Female...

Maclan Racing 4114 XT90 Connectors (4) Female Only

Maclan Racing 4114 XT90 Connectors (4) Female Only These authentic female XT90 connectors are ideal for ESC/battery connection. Features: Authentic 4 pcs of female XT90 connector Best for RC ESC and battery Includes:(4) XT90 Connectors

Maclan Racing 4113 XT90 Connectors (4) Male Only

Maclan Racing 4113 XT90 Connectors (4) Male Only These authentic male XT90 connectors are ideal for ESC/battery connection. Features: Authentic 4 pcs of male XT90 connector Best for RC ESC and battery Includes:(4) XT90 Connectors

ProTek RC 5303 T-Style Ultra Plug to XT60 Plug Adapter (Female Ultra to Male XT60)

ProTek RC 5303 T-Style Ultra Plug to XT60 Plug Adapter (Female Ultra to Male XT60) This is a Female T-Style Ultra Plug to Male "MaxxCurrent" XT60 Plug Adapter from ProTek R/C. ProTek R/C "MaxxCurrent" XT60 connectors ensure a mechanically solid, low...

ProTek RC 5302 T-Style Ultra Plug to XT60 Plug Adapter (Male Ultra/Female XT60)

ProTek RC 5302 T-Style Ultra Plug to XT60 Plug Adapter (Male Ultra/Female XT60) This is a Male T-Style Ultra Plug to Female "MaxxCurrent" XT60 Plug Adapter from ProTek R/C. ProTek R/C "MaxxCurrent" XT60 connectors ensure a mechanically solid, low...

Racers Edge Charge Adapter: Male XT60 to Male 4mm Bullets-300mm Wire

Racers Edge Charge Adapter: Male XT60 to Male 4mm Bullets-300mm Wire Racer's Edge offers a safe and convenient way to charge batteries equipped with an XT60 connector with any charger utilizing 4mm outputs. The overall length of 300mm (12 ) provides...

Punisher Series Deans 12" Charger Lead with 4mm Bullet

Punisher Series PUN4003D Deans 12" Charger Lead with 4mm Bullet This is the Punisher Series Heavy Duty Deans Style Charge Lead, featuring a Deans plug on one end connected to 4mm bullet plugs with high quality 12awg silicone wire. This charge lead can...

Punisher Series Traxxas Battery Lead 4mm Bullet

Punisher Series Traxxas Battery Lead 4mm Bullet   This is a Punisher Series 2S Charge/Balance Battery Lead with a classic Traxxas style plug and is intended for use with 2S LiPo batteries that have 4mm output sockets. This adapter cable will allow...

Punisher Series Deans Battery Lead 4mm Bullets

Punisher Series Deans Battery Lead 4mm Bullets   This is a Punisher Series 2S Charge/Balance Battery Lead with a Deans style plug and is intended for use with 2S LiPo batteries that have 4mm output sockets. This adapter cable will allow you to use...

Traxxas 3063X Series Battery Wire Harness (Traxxas ID)

Traxxas 3063X Series Battery Wire Harness (Traxxas ID) Only Traxxas Y-harnesses let you run dual-battery power for increased speed or runtime with the proven convenience and performance of genuine 2nd generation Traxxas High-Current Connectors. Use the...

Punisher Series 2S/3S Battery Charge Cable 3ft (EC3)

Punisher Series 2S/3S Battery Charge Cable 3ft (EC3)   The Punisher Series 2S/3S High Current Charge/Balance cable is the solution you've been waiting for to charge your battery more than  6 inches away from your charger. Featuring 12awg wire...

Punisher Series 2S/3S Battery Charge Cable 3ft (Traxxas)

Punisher Series 2S/3S Battery Charge Cable 3ft (Traxxas)   The Punisher Series 2S/3S High Current Charge/Balance cable is the solution you've been waiting for to charge your battery more than  6 inches away from your charger. Featuring 12awg...

Punisher Series 2S/3S Battery Charge Cable 3ft (Deans)

Punisher Series 2S/3S Battery Charge Cable 3ft (Deans)   The Punisher Series 2S/3S High Current Charge/Balance cable is the solution you've been waiting for to charge your battery more than  6 inches away from your charger. Featuring 12awg...

Racers Edge 1619 Charge Adapter: Male Tamiya to Male 4mm Bullets, 300mm Wire

Racers Edge 1619 Charge Adapter: Male Tamiya to Male 4mm Bullets, 300mm Wire Racers Edge offers a safe and convenient way to charge batteries equipped with a Tamiya-style Molex connector using any charger with 4mm outputs. The overall length of 300mm...

Racers Edge 1618 Charge Adapter: Male XT90 to Male 4mm Bullets, 300mm Wire

Racers Edge 1618 Charge Adapter: Male XT90 to Male 4mm Bullets, 300mm Wire Racers Edge offers a safe and convenient way to charge batteries equipped with an XT90 connector using any charger with 4mm outputs. The overall length of 300mm (12") provides...

Racers Edge 1622 Charge Adapter EC3 Device to Male 4mm Bullets-300mm Wire

Racers Edge 1622 Charge Adapter EC3 Device to Male 4mm Bullets-300mm Wire Racer's Edge offers a safe and convenient way to charge batteries equipped with an EC3 connector with any charger utilizing 4mm outputs. The overall length of 300mm (12 ) provides...

Racers Edge 1620 Charge Adapter: Male Deans (T-Plug) to Male 4mm Bullets-300mm Wire

Racers Edge 1620 Charge Adapter: Male Deans (T-Plug) to Male 4mm Bullets-300mm Wire Racer's Edge offers a safe and convenient way to charge batteries equipped with a Deans connector with any charger utilizing 4mm outputs. The overall length of 300mm (12...

Racers Edge 1635 XT30 Connectors (2 pairs)

Racers Edge 1635 XT30 Connectors (2 pairs) XT-style connectors have quickly become the standard in many product categories due to their ease of assembly, soldering, and reliable performance. XT30's are rated to endure 30A continuous current and are sold...

Racers Edge 1608 Battery/ESC Adapter: Female TRX to Male Tamiya

Racers Edge 1608 Battery/ESC Adapter: Female TRX to Male Tamiya This adapter allows a battery equipped with a Tamiya-style plug to be used with a Traxxas ESC.

Racers Edge 1603 Battery/ESC Adapter: Female XT60 to Male TRX HC

Racers Edge 1603 Battery/ESC Adapter: Female XT60 to Male TRX HC Tired of cutting wires and soldering connectors? This convenient adapter from Racer's Edge allows you to connect a battery with a TRX connector to an ESC equipped with a XT60 plug. 

Racers Edge 1610 Battery / ESC Adapter: Female TRX to Male EC3

Racers Edge 1610 Battery / ESC Adapter: Female TRX to Male EC3 This adapter allows a battery equipped with an EC3 connector to be used with a Traxxas ESC.

Racers Edge 1611 Battery/ESC Adapter Plug: Female TRX to Male XT60

Racers Edge 1611 Battery/ESC Adapter Plug: Female TRX to Male XT60 This compact and convenient adapter plug allows the use of XT60-equipped batteries in Traxxas vehicles utilizing HC-style connectors. Keeps vehicle wiring simple and secure while...

ProTek RC 5005 5MM to 4MM Bullet Reducer (2)

ProTek RC 5005 5MM to 4MM Bullet Reducer (2) This is a pack of two ProTek R/C 5mm to 4mm Bullet Reducers. These reducers are an absolute must for racers looking to use batteries with a 5mm bullet hole, while continuing to use 4mm bullets on their ESC,...

ProTek RC 5044 4mm Low Profile "Super Bullet" Solid Gold Connectors (2 Male)

ProTek RC 5044 4mm Low Profile "Super Bullet" Solid Gold Connectors (2 Male) This is a pack of two ProTek R/C Low Profile 4mm "Super Bullet" Solid Gold Connectors. ProTek R/C Low Profile bullets feature a redesigned solder point that incorporates a...

ProTek RC 5626 Heavy Duty EC5 Charge Lead (Male EC5 to 4mm Banana Plugs)

ProTek RC 5626 Heavy Duty EC5 Charge Lead (Male EC5 to 4mm Banana Plugs) This is a ProTek R/C EC5 Device Charge Lead. This charge lead features two 4mm bullets fixed to 14awg wire. 

Tekin 9703 "LiPo Safe" Battery Charging Sack

Tekin 9703 "LiPo Safe" Battery Charging Sack This is the Tekin "LiPo Safe" Li-Poly Battery Charging Sack. Constructed from flame resistant fiberglass, the Tekin LiPo Safe is a must have accessory and safety device in your pit setup. Charging and storing...

RL Power V1 iCharger Stand (4010, 406, 308)

RL Power V1 iCharger Stand (4010, 406, 308)   The RLPower 3D Printed Charger Stand is compatible with iCharger 4010, 406, 308 and similar sized chargers to be used with RL Power Supplies (85 amp. or 75 amp.) to save space. This stand holds your...

Bat-Safe LiPo Charging Case (Fire Resistant Safe Charging)

Bat-Safe LiPo Charging Case (Fire Resistant Safe Charging)    The Bat-Safe LiPo Charging Case is a simple and effective solution for charging and storing LiPo batteries. If you have an R/C model, chances are you own at least one lithium...