Product Description
ZYLtech PLA Plus PLA+ 1.75 mm 1 kg/2.2 lbs Color: Glossy Black (FMT-PLAPLUS-BK)
ZYLtech PLA filaments have taken the best aspects of PLA filament, including renewability, biodegradability, and adaptability. PLA, known as Polylactic Acid, is the most widely used plastic filament in 3D printing. PLA filament is a bioplastic due to the fact that it is produced from renewable natural resources such as tapioca and corn starch products. As a biodegradable material, so it is much better for the environment in contrast to petrochemical-based alternatives. PLA+ comes with improved impact resistance.
Reliability
ZYLtech filament is all about reliability. When you need a stronger and more durable functional part, you need to know you are printing with a material you can trust and depend on. ZYLtech’s NO. 1 goal is to provide you with the most reliable and the strongest 3D printer filament at the best price possible.
Quality Control
ZYLtech PLA 3D printer filament is meticulously tested for quality and consistency. We use top quality US based raw materials and additives for reliable results time after time. Our 1.75mm PLA filament tolerances of ±.05mm make for steady feed rates and reliable extrusion on both Bowden and Direct Drive setups!
Affordability
ZYLtech PLA filaments are designed with price in mind; we created an affordable solution for every 3D maker. Whether you are a pure beginner with a finite budget, or an additive manufacturer looking to save on cost of production, ZYLtech PLA is the filament to get any job done.
Color Consistency:
It's important to us at ZYLtech that all of our 3d printer filaments have consistent color in each and every roll that comes off the production floor. Our chemist and quality control department work closely to ensure that our formulas produce reliably reproducible results every time.
Specifications:
Filament:
- Diameter: 1.75mm
- Tolerance: ±0.02mm
- Density: 1.24 g/cm³
- Appx Length on Spool: 320 meters
Spool Dimensions:
- Outer Dimension of Spool: 200mmx60mm
- Inner Hole Diameter: 58mm
Recommended Temps:
- Print Temperature: 190-230°C
- Recommended Bed Temperature: optional
Recommended Build Surface:
- PEI
- Microporous Coated Glass
- Painters Tape
- Glue Stick or Hairspray on Glass (use caution with adhesives as PLA may adhere very well)
Print Tips:
- Similar to all other silk filament, Zyltech multicolor silk filament needs to be printed at higher nozzle temperature and lower speed.
- We suggest you start with following settings and adjust them based on your result. It's also a good idea to start with generic silk profile on most slicers.
- Print speed for perimeters is suggested to be slower than 60 mm/s, slower speed will result in glossy surface finish and stronger layer adhesion. It worth noting, when the parameters are tuned up perfectly, we have no problem getting successful print at 200mm/s.
- Nozzle temperature. We suggest you start with 220°C. Our multicolor silk filament is best printed between 200-230°C
- Part cooling. Because multicolor silk filament needs to be printed at higher temperature, it's important to have proper part cooling to avoid surface defects and warping. However, cooling too fast will weaken the layer adhesion. A careful balance is needed for successful print
- Top and bottom infill patterns: we suggest concentric and monotonic for the most dramatic and beautiful looks
- Spool and filament positioning: It is very important that the filament is routed to the extruder and hot-end without any twists and kinks, and ideally under constant tension. If the filament rotates, there will be undesired vertical banding.
- Recommended nozzle temp: 190°C – 230°C
- Recommended bed temp:55-65°C
- Tolerance: ±0.02mm
Includes:
- (1) PLA Plus PLA+ 3D Printer Filament 1.75mm
