Product Description
ZYLtech High Speed PLA 1.75 mm 1 kg/2.2 lbs Color: Marigold Yellow (FMT-PLAHS-MYL)
ZYLtech PLA filaments have taken the best aspects of PLA filament, including renewability, biodegradability, and adaptability. PLA, known as Polylactic Acid, is the most widely used plastic filament in 3D printing. PLA filament is a bioplastic due to the fact that it is produced from renewable natural resources such as tapioca and corn starch products. As a biodegradable material, so it is much better for the environment in contrast to petrochemical-based alternatives.
Reliability
ZYLtech filament is all about reliability. When you need a stronger and more durable functional part, you need to know you are printing with a material you can trust and depend on. ZYLtech’s NO. 1 goal is to provide you with the most reliable and the strongest 3D printer filament at the best price possible.
Quality Control
ZYLtech PLA 3D printer filament is meticulously tested for quality and consistency. We use top quality US based raw materials and additives for reliable results time after time. Our 1.75mm PLA filament tolerances of ±.05mm make for steady feed rates and reliable extrusion on both Bowden and Direct Drive setups!
Affordability
ZYLtech PLA filaments are designed with price in mind; we created an affordable solution for every 3D maker. Whether you are a pure beginner with a finite budget, or an additive manufacturer looking to save on cost of production, ZYLtech PLA is the filament to get any job done.
Color Consistency:
It's important to us at ZYLtech that all of our 3d printer filaments have consistent color in each and every roll that comes off the production floor. Our chemist and quality control department work closely to ensure that our formulas produce reliably reproducible results every time.
Our made in the USA PLA filament features ±0.02mm tolerance and improved winding. As our current imported stock is being phased out, we will update other colors to be made in the USA.
Specifications:
Filament:
- Diameter: 1.75mm
- Tolerance: ±0.02mm
- Density: 1.24 g/cm³
- Appx Length on Spool: 320 meters
Spool Dimensions:
- Outer Dimension of Spool: 200mmx60mm
- Inner Hole Diameter: 58mm
Recommended Temps:
- Print Temperature: 190-230°C
- Recommended Bed Temperature: optional
Recommended Build Surface:
- PEI
- Microporous Coated Glass
- Painters Tape
- Glue Stick or Hairspray on Glass (use caution with adhesives as PLA may adhere very well)
Print Tips:
- Print speed up to 1,200 mm/s
- Maxiumum volumetric speed
- 0.4mm nozzle up to 40mm3/s (A1 230C stainless steel nozzle tested result 38 mm3/s, Sovol Zero 230C 0.4mm tested result 41 mm3/s)
- 0.6mm nozzle up to 50mm3/s (A1 230C 0.6 hardened steel nozzle tested result 50mm3/s)
- 0.8mm nozzle up to 70mm3/s (A1 230C 0.8mm hardened steel nozzle tested result 70mm3/s)
- Recommended nozzle temp: 190°C – 230°C.
- Recommended bed temp:55-65
- Tolerance: ±0.02mm
Includes:
- (1) PLA 3D Printer Filament 1.75mm
