Product Description
ZYLtech Dual Color Matte PLA 3D Printer Filament 1.75mm 1 kg 2.2 lbs: Kings Cake (FMT-DLM-KSC)
Crafted from two distinct colors seamlessly fused into a single filament strand, this affordable multi-colored filament showcases the material's finest qualities. Experience the magic as this dual-color filament transforms your creations into captivating, matte-finished masterpieces. With each rotation, you'll discover a mesmerizing interplay of vibrant hues.
Reliability
Zyltech filament is all about reliability. When you need a stronger and more durable functional part, you need to know you are printing with a material you can trust and depend on. ZYLtech’s #1 goal is to provide you with the most reliable and the strongest 3D printer filament at the best price possible.
Quality Control
Zyltech dual color matte 3D printer filament is meticulously tested for quality and consistency. We use top quality US based raw materials and additives for reliable results time after time. Our 1.75mm dual color filament tolerances of ±.02mm make for steady feed rates and reliable extrusion on both Bowden and Direct Drive setups!
Color Consistency:
It's important to us here at ZYLtech that all of our 3d printer filaments have consistent and reliable color in each and every roll that comes off the production floor. Our chemist and quality control department work closely to ensure that our formulas produce reliably reproducible results every time.
Specifications:
Filament:
- Diameter: 1.75mm
- Tolerance: ±0.03mm
- Density: 1.24 g/cm³
- Appx Length on Spool: 330±5% meters
Spool Dimensions:
- Outer Dimension of Spool: 200mmx60mm
- Inner Hole Diameter: 52mm
Recommended Temps:
- Print Temperature: 200-230°C
- Heated Bed Temp: 50-70°C
Recommended Build Surface:
- PEI
- Microporous Coated Glass
- Painters Tape
- Glue Stick or Hairspray on Glass
Print Tips:
Similar to other dual color filament, dual color matte filament needs to be printed at higher nozzle temperature and lower speed
We suggest you start with following settings and adjust them based on your result.
1. Print speed for perimeters is suggested to be slower than 60 mm/s, slower speed will result in stronger layer adhesion. It worth noting, when the parameters are tuned up perfectly, we have no problem getting successful print at 100mm/s.
2. Nozzle temperature. We suggest you start with 210-220°C. Our multicolor filament is best printed between 200-230°C
3. Part cooling. Because multicolor silk filament needs to be printed at higher temperature, it's important to have proper part cooling to avoid surface defects and warping. However, cooling too fast will weaken the layer adhesion. A careful balance is needed for successful print
4. Top and bottom infill patterns: we suggest concentric and monotonic for the most dramatic and beautiful looks
5. Spool and filament positioning: It is very important that the filament is routed to the extruder and hot-end without any twists and kinks, and ideally under constant tension. If the filament rotates, there will be undesired vertical banding.
Includes:
- (1) Dual Color Matte PLA Series 3D Printer Filament 1.75mm
