Product Description
Traxxas XRT 8S Brushless Electric Race Truck, Blue
RACE-INSPIRED ENGINEERING
EXTREME 8S POWER AND SPEED
X-TRUCK™ SIZE AND STRENGTH
The Traxxas XRT fuses race-inspired design and engineering with X-Maxx® power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed.
Features
- VXL-8s™ Waterproof Electronic Speed Control
- Aggressive tuning for more power at any RPM
 - 8s LiPo compatible
 - Built-in cooling fan
 - Real-time telemetry via Traxxas Link
 - Machined heat sinks
 - 10-gauge silicone wire
 - Integrated protection circuits
 - LED status lights
 
 - Velineon® 1200XL Brushless Motor
- “Big Block” brushless motor
 - 4-pole 1275 kV
 - 5mm output shaft
 - Oversize aluminum heatsink for improved cooling
 - Dual cooling fans
 
 - Up to 60+ mph with Two 4s LiPo Batteries and Included Optional Speed Gear
 - Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
 - Never dulls throttle or slows the truck
 - Adjusts from off to 100% assistance from the transmitter
 
 - TQi™ 2.4GHz High Output Radio System
- TQi™ 2-channel transmitter
 - Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
 - Programmable multi-function knob
 - Adjustable steering and throttle percentage (dual rates)
 - Adjustable steering and throttle sensitivity (exponential)
 - Adjustable steering and throttle end points
 - High 13ms frame rate and near-zero latency for responsive control
 - 5-channel micro receiver (#6533) with fail-safe security
 - Patented waterproof receiver box with easy-access plug
 
 
- X-Maxx® Spec 8s Drivetrain
- Full-time shaft-driven 4-wheel drive
 - Heavy-duty steel CV driveshafts & axles
 - Splined aluminum center driveshaft
 - Fully machined aluminum stub axles
 
 - Transmission
- Mod-1 steel pinion and spur gears
 - Fixed gear mesh system
 - Torque-Biasing Center Drive
 
 - X-Maxx Spec 8s Differentials
- Heavy-duty sealed 4-gear design
 - Large scale steel ring and pinion gears
 - Splined outdrives attached with external thru-bolt method
 - Reinforced bulkhead and covers increase bearing support
 
 - Rock-Solid Motor Mounting System
- Precise preset gear mesh adjustments
 - 4 keyed pins lock the motor in place
 - Motor retention separate from gear mesh
 
 - GTX Race Shocks
- Machined aluminum threaded body
 - Extra-large bore and capacity
 - 5.2mm damper shaft
 - Lower seal cartridge includes integrated wiper seal combination
 - Height-adjustable spring retainer
 - Heavy-duty composite shock caps with pivot balls
 - Lower spring perches bolted on
 
 - WideMaxx® Suspension
- Extra-wide suspension arms
- Made from heavy-duty cold-weather composite
 
 - Performance-optimized geometry
 - Double-shear connections
 - High-strength steel suspension pins with retainers
 - 4mm machined pivot balls
 - Fixed high-strength camber and toe links
 - Heavy-duty steering blocks and axle carriers
 - Oversized wheel bearings
 
 - Extra-wide suspension arms
 
- Low-CG Chassis Design
- Modular chassis with interlocking bulkheads
 - Low center of gravity for improved handling
 - Flat bottom design
 - Heavy-duty interlocking skid plates
 - High-strength buttressing on shock towers
 - Dual snap-lock battery compartments
 - Protects batteries from side impacts
 - Allows secondary battery-clip security
 - Interlocking components for tight tolerances
 - Wire management for clean appearance
 
 - Patent-Pending Clipless Body
- Snaps in place in just seconds
 - Secure body latches are easy to use
 - Rigid internal frame
 - Dual cold-air intakes
 - Molded body reinforcements for tear-through protection
 - Protective top skids
 - Rugged high-downforce rear wing
 
 - Heavy-Duty Bumpers
- Reinforced front bumper and rear wing support
 - Absorb impact forces while retaining shape
 - Nerf bars for side impact resistance
 - Heavy-duty wheelie bar with carry handle
 
 - Wheels and Tires
- 7.4" Gravix™ race tires
 - Low sidewall for sharp turn-in response
 - Thick center carcass resists ballooning at high speed
 - Lower rotational mass for faster acceleration
 - 4.0" matte black XRT race wheels
 - High-strength glue and bead design
 - Huge 24mm splined wheel hubs
 
 - Steering
- Powerful 365 oz-in steering servo
 - Heavy-duty cam-style servo saver
 - Dirt evacuation channels
 - Fully waterproof
 
 - Sealed Ball Bearings
 - Hex hardware with Rust-Resistant Black Oxide Coating
 
Specs
Truck Specs
Length (including wing): 31.41 inches (798mm)
Front Track: 23.43 inches (595mm)
Rear Track: 23.43 inches (595mm)
Ground Clearance: 1.93 inches (49mm)
Weight: 19.70 pounds (8.94kgs) - without body
              21.03 pounds (9.54kgs) - with body
              23.87 pounds (10.83kgs) - with body & two 4s 6700mAh LiPos
Height: 10.15 inches (258mm) - ride height
             12.12 inches (308mm) - full droop
Wheelbase: 18.9 inches (480mm)
Shock Length (front): 6.79 inches (173mm)
Shock Length (rear): 6.79 inches (173mm)
Tires (Pre-Glued): 7.4 x 4.0 inches (188mm x 102mm)
Wheels: 4.3 x 5.7 inches (110mm x 147mm)
Speed Control: Velineon® VXL-8s
Motor (electric): Velineon® 1200XL Brushless with heat sink and dual fan shrouds
Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch (Spur and Pinion): Module 1.0
Chassis Structure/Material: Composite Nylon Tub
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: TQi™ 2.4GHz Transmitter with TSM® receiver™
Servo: Torque: 365oz. Speed: 0.17 sec/ 60 degrees(6.0V)
Top Speed: 60+ MPH with two 4s LiPo batteries and included optional gearing
Skill Level: 5
Battery Tray: 186mm x 51mm x 44mm
Motor and ESC Specs
Motor
Type: 1275 kv Sensorless Brushless
Weight: 665g (23.44oz)
Length: 4.32 inches (110mm)
Diameter: 1.88 inches (48mm)
Connector Type: Traxxas 6.5mm Bullet Connectors
ESC
Input Voltage: 8s LiPo (Max 33.6 Volts)
Case Size: 2.23in (58mm) / 2.83in (72mm) / 1.81in (46mm)
Weight: 215.5g (7.60oz)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Motor Connectors: Traxxas 6.5mm Bullet Connectors
Battery Connectors: Traxxas High-Current Connectors
Power Wire: 10-gauge Maxx Cable
Ports: RX Input, Auxiliary Fan, Traxxas Accessory Port
Includes
(1) XRT, Ready-To-Race® model with Traxxas Big Block™ brushless motor
(1) VXL-8s waterproof electronic speed control with integrated telemetry
(1) Quick Start Guide
(1) TQi™ 2.4GHz radio system
High quality maintenance tools
Optional speed gears
What You’ll Need:
LiPo Batteries - Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries (part #2890X) or the Dual 4s Completer Pack (Part #2997).
LiPo Balance Charger with iD™ - Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971).
AA Alkaline Batteries - Four AA alkaline batteries for the transmitter.