Product Description
Team Associated 90046 RC10B7.1 Team Kit (ASC90046)
Team Associated has been at the leading edge of 1:10 scale 2WD off road for over 40 years, starting with the original RC10 and are proud to introduce the RC10B7.1. 40 years has seen a lot of development and changes with each generation being a step forward from the last. The RC10B7.1 boasts the long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed which leads to faster lap times and an overall smoother drive feel.
The RC10B7.1 is the recommended starting kit for those who plan to race on carpet, astroturf, and some high-grip sealed clay tracks. This kit comes equipped with an all-new gear differential, front suspension arms with hinge pin brace for improved durability, and an optimized high-grip setup which includes stiffer springs and higher pack shock pistons. As with previous generations, the RC10B7.1 and RC10B7.1D feature fully interchangeable parts between the two kits which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion of any Team Associated race platform. 
Racing Heritage Refined
Key updates include a revised 3-gear laydown transmission that reduces rotational mass, strengthened front suspension arms with a hinge pin brace for added durability, updated steering and caster blocks for easier assembly and lighter weight, lowered shock towers and arm mounts for a reduced center of gravity, and enhanced drivetrain options that improve efficiency, consistency, and overall race-day performance.
Advanced Suspension Geometry
Both kits feature updated long-arm suspension, KPI-adjustable steering blocks, and refined arm mounts that dramatically increase grip, stability, and corner speed, delivering a smoother, more predictable feel across changing track conditions.
Track-Specific Performance 
The RC10B7.1 is optimized for carpet, astroturf, and high-grip clay with a high-volume gear differential, stiffer springs, and higher pack pistons, while the RC10B7.1D is tuned for dirt and low-grip surfaces using a ball differential, softer springs, and smoother damping for maximum control.
Pro-Level Tunability
With fully interchangeable parts between both kits, a lightweight 7075-T6 aluminum chassis, big-bore shocks, anti-roll bars (B7.1), and multiple suspension and drivetrain options, the RC10B7.1 platform offers racers unmatched adjustability, durability, and race-winning potential.
Features: 
- Includes 3-Gear Laydown Transmission that maintains original B7 motor position while reducing rotational weight and drag
- Steering and Caster Block Assembly simplifies assembly and reduces weight without sacrificing tunability
- -2mm Front Ballstud Mount included along with updated Top Plate and Standard Ballstud Mount
- Front Suspension Arms with Hinge Pin Brace for improved durability
- -2mm Front Shock Tower and "Gull-Dropper" Rear Shock Tower and Suspension Arm Plates for lower center of gravity
- Includes FT Inverted Rear Shock Standoff Set
- 1-degree Arm Mount "C"
- Includes 78mm Rear Suspension Arms and 69mm CVA Bones
- Includes Front and Rear Anti-Roll Bars and hardware
- Includes High-Volume Gear Differential
- Low-Profile RC10B7 Body, 7-inch Rear Wing, and 2.5-inch Front Wing
- 7075-T6 Aluminum Chassis with Optional Weight Plate Pockets (Aluminum plate included with both kits)
- Shock Tower Covers Front and Rear
- 3.5mm Turnbuckles and Ballcups
- 13mm Big-Bore Shocks
- Updated long-arm suspension increases grip and corner speed
- Weight-centralized electronics layout improves overall balance
- KPI-adjustable steering blocks enhance steering precision and tuning
- 3-gear laydown transmission reduces rotational mass and drag
- Revised steering and caster blocks lower weight and simplify assembly
- Reinforced front suspension arms improve durability
- Lowered shock towers reduce the center of gravity
- Track-specific features optimize performance for grip conditions
- 7075-T6 aluminum chassis delivers strength with lightweight rigidity
- Fully interchangeable parts allow easy setup changes between kits
Needed to Complete:
- 1:10 Scale Electric Motor & Electronic Speed Control
- 7.4V-7.6V 2S LiPo with "shorty" Battery Dimensions
- Compatible Battery Charger
- 2-Channel Surface Transmitter, 2-Channel Receiver & Steering Servo
- Polycarbonate Specific Spray Paint for Body
- 1:10 Scale Off-Road Wheels & Tires
- Tools & Silicone Fluids
Includes:
- (1) RC10B7.1 Team 1/10 2WD Electric Buggy Kit
- (1) Product Instruction Manual
