Traxxas 2532 Tie Bar Fiberglass (Slash)

Traxxas 2532 Tie Bar Fiberglass (Slash) This is a fiberglass tie bar from Traxxas. This tie bar goes on the front of the bulkhead, and both front hinge pins go through it. Optional Upgrade:ST2532XB (Aluminum) Traxxas Nitro Rustler Traxxas Nitro Slash...

Traxxas 2362 Shock Rebuild Kit (Slash)

Traxxas 2362 Shock Rebuild Kit (Slash) The Traxxas shock rebuild kit includes everything that is needed to rebuild two shocks. The package includes silicone o-rings, rubber diaphragms, c-clips and spacers. Traxxas Bandit Traxxas E-Maxx Traxxas...

Traxxas 1765 Rubber Diaphragms (4) (Slash)

Traxxas 1765 Rubber Diaphragms (4) (Slash) This is a set of four replacement shock diaphragms from Traxxas. These diaphragms go into the top of the shock body, and provide the seal for the shock cap. Traxxas E-Maxx Traxxas Nitro 4-Tec Traxxas Nitro...

Traxxas Hardened Steel Front Drive Hub (Slash 4x4)

Traxxas 6888X Hardened Steel Front Drive Hub (Slash 4x4) This is an optional Traxxas Hardened Steel Front Drive Hub, and is intended for use with the Traxxas Slash 4x4 and other Traxxas vehicles. Includes: (1) Front Drive Hub (1) Screw...

Traxxas 2530 Front Bulkhead (Slash)

Traxxas 2530 Front Bulkhead (Slash) This is a replacement Traxxas Front Bulkhead, and is intended for use with the Rustler, Stampede, Nitro Stampede, Nitro Sport and Slash vehicles. Features:Factory Replacement Part Includes:(1) Front Bulkhead Optional...

Traxxas Rebuild Kit, Slipper Clutch (Slash)

Traxxas 5552X Rebuild Kit, Slipper Clutch (Slash) This is a Traxxas Slipper Clutch Rebuild Kit, and is intended for use with the Traxxas Slash 4x4 and other Traxxas Vehicles.  Includes: (1) steel disc (3) friction pads (2) springs (1) pin (1) 4mm...

Traxxas Aluminum Slipper Pressure Plate & Hub Set (Slash)

Traxxas Aluminum Slipper Pressure Plate & Hub Set (Slash) This is a replacement Traxxas Aluminum Slipper Pressure Plate and Hub Set constructed out of Aluminum Alloy. Traxxas Bandit Traxxas Bandit VXL Traxxas Bigfoot Traxxas Craniac Traxxas Fiesta...

Traxxas Telluride 4x4 Front & Rear Body Mount Set

Traxxas 7415X Telluride 4x4 Front & Rear Body Mount Set This is a replacement Traxxas Telluride 4x4 or Ford Fiesta ST Rally Front & Rear Body Mount Set.  Features:Factory Replacement Body Mount Set Includes:(1) Front and Rear Body Mount Set ...

Traxxas Steering Bellcranks/Servo Saver (Telluride)

Traxxas Steering Bellcranks/Servo Saver (Telluride) This is a replacement Traxxas Steering Bellcrank Set. Package includes steering bellcranks, servo saver, servo saver spring, servo spring retainer, servo horn and hardware. Features:Factory Replacement...

Traxxas Suspension Arm (2) (Telluride 4x4)

Traxxas Suspension Arm (2) (Telluride 4x4) This is a pack of two replacement Traxxas Suspension Arms. These arms are used in the front and rear positions, as well as the left and right side.  Traxxas Fiesta ST Rally 4WD Traxxas Telluride 4x4 ...

Traxxas 5830 Slash 2WD LCG Conversion Kit

This is an optional Traxxas Slash 2WD LCG Conversion Kit. Traxxas now offers a complete Low Center-of-Gravity chassis conversion kit for 2WD Slash trucks! The Low-CG Conversion Kit lowers the chassis, battery, and electronic components to bring all the...

Traxxas Anaconda Tires w/All-Star Rear Wheels (2) (Jato) (Chrome) (Standard)

Traxxas Anaconda Tires w/All-Star Rear Wheels (2) (Jato) (Chrome) (Standard) Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on...

Traxxas 5mm Steel Front Toe Link Turnbuckle (2) (T-Maxx)

Traxxas 5mm Steel Front Toe Link Turnbuckle (2) (T-Maxx) This is a pack of two replacement Traxxas 5mm Steel Front Toe Link Turnbuckles.  Traxxas E-Maxx Traxxas T-Maxx  

Traxxas Rubber Sealed Ball Bearings 12x18x4mm (2)

Traxxas 5120 Rubber Sealed Ball Bearings 12x18x4mm (2) Rubber-sealed ball bearings provide smooth, long-lasting and precise driving, especially in dirt environments the rubber-sealed ball bearings provide the ultimate protection. Traxxas 4-Tec 2...

Traxxas 4mm Grub Screws (6)

Traxxas 4mm Grub Screws (6) This is a pack of six 4mm grub screws screws from Traxxas. These will fit any vehicle, including the Traxxas Revo. Traxxas E-Revo Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Slash Traxxas Revo Traxxas Slayer Pro 4x4...

Traxxas 4683 Spur Gear 48 Pitch (83T) (Slash)

Traxxas 4683 Spur Gear 48 Pitch (83T) (Slash) Traxxas offers a complete selection of 48-pitch spur gears for performance tuning. Traxxas Bandit Traxxas Bandit VXL Traxxas Bigfoot Traxxas Fiesta ST Rally 4WD Traxxas Raptor Traxxas Rustler Traxxas...

Traxxas 4676 Spur Gear 48 Pitch (76T) (Slash)

Traxxas 4676  Spur Gear 48 Pitch (76Tooth) This is a replacement 48P 76T spur gear from Traxxas. Features:Plastic/nylon construction48 Pitch76 Tooth Includes:1 Spur Gear Traxxas Bandit Traxxas Rustler Traxxas Stampede Traxxas Telluride 4x4 ...

Traxxas Ball Bearing 10x15x4mm (2)

Traxxas Ball Bearing 10x15x4mm (2) This is a pair of Traxxas 10x15x4mm ball bearings. Perfect for use in the T-Maxx & XO-1 Models FEATURES: Stainless Steel construction INCLUDES: (2) 10x15x4mm Bearings

Traxxas Shaft Slipper Clutch w/Roll Pin (Slash)

Traxxas Shaft Slipper Clutch w/Roll Pin (Slash) This is a replacement slipper shaft with spring pin from Traxxas. Features: Steel construction Direct replacement part Includes: 1 Top shaft Traxxas Stampede Traxxas Bandit Traxxas Rustler Traxxas...

Traxxas 3752 Stub Axle Carriers (2) (Slash)

Traxxas 3752 Stub Axle Carriers (2) These are the replacement stub axle carriers from Traxxas. These require 5x11x4mm bearings. Features:Plastic constructionDirect replacement part Includes:1 Set stub axle carriers Traxxas...

Traxxas 3743 Steering Bell Cranks (Slash)

Traxxas 3743 Steering Bell Cranks (Slash) This is a replacement bell crank set from Traxxas. Includes one right bell crank, one left bell crank, and one drag link. Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler Traxxas Slash  

Traxxas 3696 30T Idler Gear, Steel (VXL) (Slash)

Traxxas 3696 30T Idler Gear, Steel (VXL) (Slash) This is a replacement 30T steel transmission idler gear from Traxxas. Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede  

Traxxas Front Wheel Hex, Tall Offset 12mm w/ Pins

Traxxas 3654 Front Wheel Hex, Tall Offset 12mm w/ Pins    These are the replacement wheel hex used on some Traxxas vehicles.   Features: Plastic Construction Grey inColor Includes:  (2) 12mm Wheel Hex (2) Pins Optional...

Traxxas 3640 Suspension Pin Set (Slash)

Traxxas 3640 Suspension Pin Set (Slash) This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot. Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete...

Traxxas 3619 Front & Rear Body Mount Set (Stampede)

Traxxas 3619 Front & Rear Body Mount Set (Stampede) This is a replacement Traxxas Adjustable Front/Rear Body Mount Set, and is intended for use with the Traxxas Monster Jam Replica trucks. Features:Factory Replacement Body Mount Set Includes:(1)...

Traxxas Delrin Machined Drive (Slash)

Traxxas Delrin Machined Drive (Slash)   Machine cut gears are more precise for less wear and friction. Provides quiet, more efficient operation. Use a light coating of silicon grease. Note: Part #TRA3195X & TRA1996X must be used together. A...

Traxxas Steel Top Drive Gear 22T (Slash)

Traxxas Steel Top Drive Gear 22T (Slash) This is a replacement 22T steel top drive gear from Traxxas. Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede  

Traxxas Ball Bearing 5x8x2.5mm (2)

Traxxas Ball Bearing 5x8x2.5mm (2) Steel ball bearings deliver more speed and increase the life of moving parts by reducing friction. Bearings also last longer and require less maintenance than bushings. Traxxas 4-Tec 2.0 Traxxas Bandit Traxxas Bandit...

Traxxas 3x12mm Button Hex (6)

Traxxas 3x12mm Button Hex (6) This is a pack of six 3x12mm button head machine screws from Traxxas. These will fit any vehicle, including the Traxxas Revo. Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas 1/16 Summit...

Traxxas 3x12mm Countersunk Hex Screws (6)

Traxxas 3x12mm Countersunk Hex Screws (6) This is a pack of six Traxxas 4x12mm Countersunk Screws, and are intended for use with the Traxxas Slash 2WD, Bandit VXL, Stampede VXL and Rustler VXL 1/10 vehicles. Traxxas 4-Tec 2.0 Traxxas Bandit VXL...

Traxxas Body Washers (8)

Traxxas Body Washers (8) This is a pack of eight Traxxas Universal Body Washers. Traxxas 4-Tec Traxxas Bandit Traxxas E-Maxx Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Revo...

Traxxas 4mm Nylon Locking Nuts (10)

Traxxas 4mm Nylon Locking Nuts (10) This is a pack of ten Traxxas 4mm Lock Nuts and are intended for use with Traxxas vehicles. Cars/Trucks Traxxas Bandit Traxxas Bandit VXL Traxxas Bigfoot Traxxas Craniac Traxxas E-Maxx Traxxas Fiesta ST Rally 4WD...

Traxxas 1654 Wheel Hubs 12mm (Slash)

Traxxas 12mm Hex Stub Axle Pin & Collar Set These are the replacement rear wheel adapters for most 1/10 vehicles. These are 12mm hex hubs that connect the rear wheels to the axles. Includes:  2 Plastic 12mm hex collars (wheel adapters) 4...

TRAXXAS 3x8mm Hex Cap Screws (6)

TRAXXAS 3x8mm Hex Cap Screws (6) This is a set of six Traxxas 3x8mm Cap Head Screws with 2.5mm Wrench & Washers, and are intended for use with the Traxxas Bandit/Stampede/Rustler VXL vehicles, as well as the Slash and Nitro 4-Tec 3.3. You can replace...

Traxxas 3691A Gearbox Halves w/Idler Shaft (Gray) Slash, Rustler, Bandit, Stampede

Traxxas 3691A Gearbox Halves w/Idler Shaft (Gray) Slash, Rustler, Bandit, Stampede This is a replacement gray gear box halves with idler shaft set from Traxxas. Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede  

Traxxas 6851X Heavy Duty Front Driveshaft Assembly

Traxxas 6851X Heavy Duty Front Driveshaft Assembly This is a replacement Traxxas Heavy Duty Front Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This front driveshaft can be used on the left or right side of the chassis, is...